Near surface gold mineralisation at No 11 Shaft Project
Released
Released
Announcement PDF
ASX Announcement and Media Release
Monday, 4 April 2016
Fast Facts
Capital Structure:
Shares on issue
Options
Market Cap
Cash in Bank
Debt
Enterprise Value (EV)
EV/oz
@ 4 April 2016
456 million
52 million
A$8.67 million
A$1.3 million
Nil
A$7.37 million
A$6.05/oz
Company Directors & Management
Michael Quinert
Chairman
Vin Savage
Executive Director
Neil Pretorius
Non-Exec Director
Hulme Scholes
Non-Exec Director
Confirmation of near surface gold mineralisation at No 11
Shaft Project
Highlights
19.9%
11%
74%
Company Highlights
South Africa
o near surface and underground targets
o 1.217m oz JORC resource
Measures: 302,000
Indicated: 566,200
Inferred: 349,400
o Historic estimate of 12.8m oz at 4.6g/t
o 31.8m ozs Au produced historically
14 NQ diamond holes completed testing near surface portions of the unmined
Bird Reef package (the White Reef representing the lowermost reef and major
gold bearing horizon)
Top Shareholders ≈
Twynam Ag
DRD Gold Ltd
Top 40 Shareholders
ASX: WWI
www.westwitsmining.com
13 of 14 holes intersected the Bird Reef package – gold grades were encountered
in all holes
Out of the 13 reef intersections, three holes have not intersected the target
White Reef due to interference from a mafic sill the Western zone will be
explored by trenching
Best intercepts include
o
VSF111 - 0.29 m @ 10.2 g/t Au
o
VSF 112 - 0.14 m @ 9.99 g/t Au
o
VSF 110 - 0.21 m @ 7.15 g/t Au
o
VSF 104 - 0.22 m @ 5.70 g/t Au
The new drilling data will be incorporated into the large pre-existing historic
dataset of underground mining samples to facilitate the Estimation of a new
Mineral Resource for the Number 11 Shaft Project
Indonesia
o High grade placer deposit
o Project show early stage similarities
with discoveries inc; Porgera, Edie
Creek, Wau
o Independent geologists believe source
of nuggets likely to be local, based on
the size and shape of the nuggets
discovered
West Wits Mining Limited (“West Wits” or “the Company) is pleased to announce it
has received the assay results for its maiden 14 diamond hole program at the Number
11 Shaft Project which forms part of the Company’s Soweto Cluster Gold Project,
Gauteng Province, South Africa. The program was designed to test an unmined
section of the Bird Reef on which the Number 11 Shaft is located. The “Number 11
Shaft” project is the Company’s current highest priority exploration prospect within
its 66.6% owned Soweto Cluster on the Central Rand portion of the famous
Witwatersrand Goldfield.
Michael Quinert, Chairman of West Wits said, “These new results confirm our
interpretation that there is a significant extent of unmined Bird Reef centred around
Contact Details
West Wits Mining Limited
ACN 124 894 060
Suite 1, 1233 High Street
Armadale VIC 3143
T: +61 3 8692 9049
F: +61 3 8692 9040
E: info@westwitsmining.com
W: www.westwitsmining.com
the historic position of the Number 11 Shaft. Excitingly 13 of the 14 holes intercepted
the target mineralisation as planned and this gives us the confidence to commit to
completing a new Resource Estimation for this portion of the project. We expect that
the new estimation will be released to the Market within the coming few weeks”.
-2-
Figure 1: Location plan highlighting the position of the No 11 Shaft Project within the Soweto Cluster and the outcrop traces of the main reef
horizons that were historically mined.
Bird Reef Target Mineralisation
The Bird Reef package in the vicinity of the No 11 Shaft is the target for the recently completed drilling which
represents a significant unmined portion of the Bird Reef that is centred around the existing underground
infrastructure of a disused shaft on Rand Leases, at the eastern portion of the Soweto Cluster.
Figure 2: Detail of the reefs that make up the Bird Reef package. The upper three reefs are prospective for uranium but the target of this drilling
campaign is the White Reef, which has been historically mined.
-3-
Figure 3: Collar plan of the 14 diamond drill holes.
Number 11 Shaft Project Exploration Target
West Wits has previously published an Exploration Target for the “Number 11 Shaft” Project based on historic mining
and sampling data. The current round of drilling will provide new data in an area above the historic underground
sampling in preparation for a calculation of a Mineral Resource Estimate under the JORC Code 2012 guidelines.
Exploration Target for the Number 11 Shaft Project: (ASX 13/10/15)
Category
Tonnes Thousands
Grade g/t
Ounces Au
Low range
600
4.5
85,000
Upper Range
700
6.0
140,000
Table 1: The Exploration Target is stated as ranges of potential tonnes and grades. Number differences may occur due to rounding errors. The
potential quantity and grade is conceptual in nature, there has been insufficient exploration and evaluation of historical information to estimate
a Mineral Resource. It is uncertain if further exploration will result in the estimation of a Mineral Resource. Competent Person Dr Andrew Tunks.
The form and context in which the Competent Persons findings are presented have not materially changed
In January 2016 West Wits Mining Limited restated the previous DRD (2000, JORC 1997) resources to 400 m depth
from surface in compliance with JORC (2012) for the Soweto Cluster (Table 1).
Mineral Resource Estimate
Category
Tonnes (kT)
Grade g/t
Ounces Au
Measured
2,214
4.25
302,300
Indicated
5,317
3.31
566,400
Measured & Indicated
7,531
3.59
868,700
Inferred
3,452
3.15
350,000
Total
1,098
3.45
1,218,700
Table 2: Mineral Resource estimate for the Soweto Cluster at a 2.0 g/t cut-off published in the WWI ASX Announcement, January 2016. Number
differences may occur due to rounding errors. The Company is not aware of any new information or data that materially affects the information
included in the announcement and confirms that all material assumptions and technical parameters underpinning the estimates above continue
to apply and have not materially changed. The form and context in which the Competent Persons findings are presented have not materially
changed. Mineral Resource Estimate under the JORC 2012 Code (WWI ASX release 22 Jan 2016 Competent Person Hermanus Swart).
-4The Number 11 Shaft area (Figure 3 and Figure 4) was one of the main production areas of the former Rand Leases
Mine. The area was previously mined in open pits on both sides of 11 Shaft and underground from 7 Level (Figure 4).
With 11 Shaft and its associated metallurgical plant no longer operational, an opportunity arises to mine the remaining
near surface ore (Figure 4).
Figure 4: No 11 Shaft area indicating extent of historical mining and potential open pit area and unmined underground blocks of
ore at the base of the potential pit.
Current Drilling Program
The aims of the current program are threefold;
Target the White Reef (lowermost reef of the Bird Reef package, main gold carrier, Figure 2)
Test the payshoot model (to enable refinement of the geological model and estimation domains)
Facilitate the upgrade of the declared Exploration Target category to Inferred and Indicated Resource
categories (drill spacing of 50 m, intersection of White Reef in the middle of the proposed pit)
A total of 14 holes, numbered VSF101 to VSF114, were drilled inclined at 60 degrees along the strike of the Bird Reef
package outcrop (Figure 3). The Bird Reef package dips at 45 degrees to the southwest. The holes were drilled by
Professional Drilling Services (PDS), contracted by Shango Solutions. PDS utilised a XY44 spindle drive rig, with a wire
line core recovery system. The holes were drilled NQ size (75.6 mm diameter holes with 47.6 mm diameter core).
Figure 5 details a cross-section through borehole VSF111, displaying the various reefs and associated grades. A strike
section through boreholes VSF101 to VSF114 is depicted in Figure 6. A summary of White Reef intersections per
borehole is provided in Table 3.
-5Collar Location and Orientation
Borehole
X (Long)
ID
Y (Lat)
Z
VSF101
27.864117 -26.189167 1705
VSF102
27.894633 -26.189237 1704
VSF103
27.895067 -26.189333 1704
VSF104
27.895533 -26.189616 1702
VSF105
27.895937 -26.189851 1701
VSF106
26.896433 -26.190050 1699
VSF107
27.897017 -26.190050 1698
Azimuth Dip
White Reef Intersection
Depth Sample From
(m)
ID
(m)
12 -60 39.80 A0744
A0745
A0746
A0747
A0748
A0749
8 -60 25.20 A0593
A0594
A0595
A0596
15 -60 25.15 A0771
A0772
A0773
12 -60 25.05 A0736
A0737
12 -60 36.00 A0713
A0714
A0715
A0716
A0717
A0718
A0719
A0720
12 -60 39.00 A0569
A0570
A0571
A0572
A0573
A0574
A0575
12 -60 38.45
23.87
24.12
24.39
24.54
24.79
25.09
22.97
23.20
23.34
23.53
16.94
17.18
17.33
20.62
20.84
31.73
32.00
32.29
32.57
32.80
33.18
33.48
33.72
33.47
33.72
34.03
34.26
34.40
34.55
34.95
True
To Interval
Width
(m)
(m)
(m)
Au
Au
Rock Total
(g/t) (cmg/t) Type CW (m)
24.12
24.39
24.54
24.79
25.09
25.29
23.20
23.34
23.53
23.73
17.18
17.33
17.69
20.84
21.09
32.00
32.29
32.57
32.80
33.18
33.48
33.72
34.12
33.72
33.97
34.26
34.40
34.55
34.95
35.30
1.88
1.91
0.12
3.57
0.08
1.91
0.19
1.89
0.24
0.41
0.68
1.99
0.06
5.70
1.40
2.22
2.37
0.72
1.72
0.65
2.17
0.02
0.03
0.62
2.53
3.76
0.13
5.65
0.45
0.04
0.25
0.27
0.15
0.25
0.30
0.20
0.23
0.14
0.19
0.20
0.24
0.15
0.36
0.22
0.25
0.27
0.29
0.28
0.23
0.38
0.30
0.24
0.40
0.25
0.25
0.23
0.14
0.15
0.40
0.35
0.24
0.26
0.14
0.24
0.29
0.19
0.22
0.13
0.18
0.19
0.22
0.14
0.33
0.20
0.23
0.27
0.29
0.28
0.23
0.37
0.30
0.24
0.39
0.22
0.22
0.20
0.12
0.13
0.35
0.30
45
50
2
86
2
37
4
25
4
8
15
27
2
114
32
59
68
20
39
24
64
0
1
13
55
75
2
73
16
1
CONG
CONG
QTZ
CONG
QTZ
CONG
CONG
CONG
CONG
Qga
CONG
QTZ
CONG
CONG
CONG
CONG
CONG
CONG
CONG
QTZ
CONG
QTZ
QTZ
CONG
CONG
CONG
Qga
CONG
Qga
Qga
Weighted
Avg. Au
(g/t)
1.37
1.62
0.71
0.57
0.68
0.64
0.43
3.41
2.35
1.17
1.53
1.53
0.73
2.72
0.81
2.22
1.59
0.94
0.93
4.09
1.18
0.29
2.12
5.26
1.17
0.87
White Reef Faulted Out
VSF108
27.897433 -26.190167 1699
VSF109
27.897900 -26.190250 1700
VSF110
27.898332 -26.190533 1700
VSF111
27.898833 -26.190717 1700
VSF112
27.899264 -26.190800 1699
VSF113
VSF114
27.899767 -26.190933 1698
27.900250 -26.191033 1697
12 -60 25.18 A0703
A0704
A0705
12 -60 20.63 A0552
A0553
A0554
12 -60 25.25 A0531
A0532
A0533
A0536
A0537
12 -60 33.00 A0518
A0519
A0520
A0601
A0602
12 -60 36.19 A0492
A0495
A0496
A0497
A0498
A0499
12 -60 36.75 A0465
12 -60 36.10 A0428
A0429
A0430
A0431
A0432
A0433
13.13
13.37
13.60
17.16
17.41
17.80
23.06
23.27
23.67
24.07
24.47
30.32
30.54
30.71
31.00
31.23
29.07
29.26
29.64
29.91
30.07
30.21
32.66
31.62
31.82
31.98
32.26
32.39
32.72
Table 3: Drilling and assay data for significant intercepts of the White Reef.
13.37
13.60
13.91
17.41
17.80
18.05
23.27
23.67
24.07
24.47
24.75
30.54
30.71
31.00
31.23
31.33
29.26
29.64
29.91
30.07
30.21
30.31
32.97
31.82
31.98
32.26
32.39
32.72
32.84
0.24
0.23
0.31
0.25
0.39
0.25
0.21
0.40
0.40
0.40
0.28
0.22
0.17
0.29
0.23
0.10
0.19
0.38
0.27
0.16
0.14
0.10
0.31
0.20
0.16
0.28
0.13
0.33
0.12
0.23 1.90
0.22 5.53
0.29 1.26
0.23 4.59
0.35 1.69
0.23 0.69
0.20 7.15
0.38 0.01
0.38 0.09
0.38 0.06
0.26 0.09
0.20 3.97
0.16 1.34
0.27 10.20
0.21 0.02
0.09 0.68
0.18 3.90
0.36 0.36
0.26 1.26
0.15 0.05
0.13 9.99
0.10 0.04
0.29 5.26
0.19 0.99
0.15 3.11
0.27 0.17
0.12 1.01
0.32 0.04
0.11 1.49
43
120
37
104
60
16
141
0
3
2
2
80
21
272
0
6
70
13
32
1
133
0
155
19
48
4
13
1
17
CONG
CONG
CONG
CONG
Qga
CONG
CONG
Qga
GQ
Qga
Qga
CONG
CONG
CONG
QTZ
CONG
CONG
QTZ
CONG
QTZ
CONG
QTZ
CONG
CONG
CONG
QTZ
CONG
QTZ
CONG
-6-
Figure 5: Cross-section through borehole VSF111 displaying the various reefs and associated grades.
Figure 6: Strike section through boreholes VSF101 to VSF114 displaying the various reefs and associated grades.
-7Interpretation of Results
Scrutiny of the gold grades relative to the stratigraphic position of the conglomerates reveals the following:
The White Reef Hangingwall Bands yield low (1-2 g/t) to moderate (2-5 g/t) gold grades. Significant single gold
grades were observed in several samples, e.g. VSF103 (1.99 g/t), VSF104 (5.7 g/t), and VSF110 (7.15 g/t) (Table
3).
Payshoot trends exhibit east-southeast trend (Figure 7).
The White Reef gold grades vary considerably, this can be contributed to:
o
The highest gold grades are present in the upper portion of the White Reef (Table 3). This is especially
pronounced in boreholes VSF108 to VSF114. This is in line with previous published studies that indicate
that 90% of the gold is concentrated at the top of the channel, along the payshoot orientation within
the Bird Reef package in the Rand Leases area.
o
Current understanding of the geological setting suggests that VSF101 to VSF103 were stopped in the
White Reef Hangingwall Bands. A sill was intersected below the Hangingwall Bands and it is suspected
that the White Reef is preserved below the sill. Alteration associated with the sill complicates reef
identification. This will be clarified and if required, rectified during future exploration activities.
o
The White Reef has been faulted out in borehole VSF107 (Figure 6).
Figure 7: Payshoot model for the Number 11 Shaft project -based on extensive underground sampling.
-8Future Activities
The following future activities are planned:
Resource estimation, including the drilling results of the recent drilling campaign and the results of the
geological modelling, will assist in establishing the feasibility of potential future mining. This resource will also
include the White Reef Hangingwall Bands.
Regional and local sedimentological and structural models will enable the projection of trends and the
definition of domains. These domains will serve as input for resource estimation to avoid mixing of geostatistically distinct populations. Detailed facies descriptions will enhance the understanding of the geological
setting and enable detailed palaeo environmental reconstruction of the Bird Reef package.
Future drilling will also consider downdip drilling and possibly trenching. A lower gold tenor may be observed
in the oxidised zone and this will also be tested.
For and on behalf of the board
Michael Quinert
Chairman
West Wits Mining Limited
For further information visit www.westwitsmining.com
Or Contact
Tim Chapman
Telephone: +61 3 8692 9049
Competent Persons Statement
The information in this announcement that relates to Exploration Results is based on information compiled by Hermanus Berhardus Swart, a
Competent Person who is a Professional Natural Scientist registered with South African Council for Natural Scientific Professions accredited (No.
400101/00) and a Member of the Geological Society of South Africa, each of which is a “Recognised Professional Organisation” (RPO) that is
included in a list that is posted on the ASX website from time to time.
Hermanus Berhardus Swart is employed by Dunrose Trading 186 (PTY) Ltd trading as Shango Solutions, which provides services as geological
consultants to the Company.
Hermanus Berhardus Swart has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and
to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves”. Hermanus Berhardus Swart consents to the inclusion in this announcement of the
matters based on his information in the form and context in which it appears.
Dr Andrew J. Tunks MAIG
The peer review of the exploration program and results was undertaken by Dr. Andrew Tunks and represents an accurate representation of the
available data. Dr. Tunks (Member Australian Institute Geoscientists) is a consultant to the Company and has sufficient experience that is
relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent
Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Dr
Tunks consents to the inclusion in the report of the matters based on his information in the form and context in which it appears.’
-9Appendix 1
JORC TABLE 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections)
Criteria
Number 11 Shaft Drilling
Diamond drilling was utilised. The 47.6mm diameter core was split and half core
was submitted for assays. The samples included 2cm waste on the footwall and
hangingwall contacts of the reef. Minimum sample length was 10cm with a
maximum of 40cm.
Sampling
Suitable references and blanks were inserted after every 10th sample. The
laboratory also performed own internal validation by analysing duplicate
Techniques
samples and inserting standards as part of their accreditation.
Primary preparation involved crushing of the entire samples. The samples were
split with a riffle splitter to obtain a sub-fraction, which was then pulverised in a
vibrating pulveriser. Fire assay of an approximately 40g portion of the sample
was utilised.
Drilling Techniques
Diamond drilling with a 47.6mm inside diameter (NQ), was conducted to
ascertain reef locality and grade. A standard tube core barrel and diamond
impregnated bit was utilised. Core was not oriented.
Drill Sample
Recovery
A minimum of 95% core recovery was required, otherwise holes were redrilled.
Core was fitted and reconciled against drill meters provided by driller.
Core samples were geologically and geotechnically logged to a detail required
for appropriate Mineral Resource estimations, mining studies and metallurgical
Logging
studies.
Core logging was qualitative in nature. Each core tray was photographed and the
White Reef intersections scanned.
The total length (100%) of the relevant core intersections was logged.
Core samples were diamond cut and one half submitted for assays.
Core samples were sorted, dried and weighed. Primary preparation was by
crushing of the entire sample. The samples were split with a riffle splitter to
Sub-sampling
Techniques and
Sample Preparation
obtain a sub-fraction, which was then pulverised in a vibrating pulveriser.
Suitable references and blanks were inserted after every 10th sample. The
laboratory also performed internal checks by analysing duplicate samples and
inserting their own standards as part of their accreditation.
Sample sizes are appropriate to the grain size of the material being sampled.
- 10
Fire assay of an approximately 40g portion of the sample was utilised to allow
separation of gold in the sample. Gold content has been determined by
Inductively Coupled Plasma (ICP) Optical Emission Spectrometry. Uranium
content was determined by X-Ray Fluorescence (XRF) Spectrometry on glass
Quality of Assay
beads cast using 12:22 flux of the sample with 10% lithium-nitrate.
Data and
Laboratory Tests
No geophysical tools were used.
Suitable references and blanks were inserted after every 10th sample. The
laboratory also performed their own internal validation by analysing duplicate
samples and inserting their own standards as part of their accreditation.
The remaining half core was split (i.e. quarter of original 47.6 mm diameter core)
and a second sample was taken to account for the nugget effect. If samples
Verification of
yielded anomalous results, then the returned pulps were resubmitted as a new
Sampling and
sample.
Assaying
All the logging and sampling data was captured into a Microsoft Access database.
Statistics of sample precision were performed in graphical format.
Location of Data
Points
The average of repeat and original samples was utilised.
Collar surveys were performed utilising a Garmin handheld GPS.
WGS1985 coordinates were converted to Cape LO27, a South African grid
system.
Topographic control was achieved by surveying from official surface beacons
and is deemed accurate and adequate for the purpose.
geological and grade continuity appropriate for a Mineral Resource estimation.
Data Spacing and
Distribution
The data spacing and distribution is sufficient to establish the degree of
The drill spacing should be sufficient for at least an Inferred Resource category.
Modelling will consider all individual samples before compositing of each
sample section to represent the total reef intersection.
Orientation of Data
in Relation to
Geological
Structures have no known influence on the mineralisation of the Witwatersrand
placer type reefs, other than displacements.
Holes were drilled approximately perpendicular to the dip of the Witwatersrand
placer type reefs, which will prevent a bias as opposed to when drilling is
Structure
conducted semi parallel to the strata.
Sample Security
Samples were delivered to laboratory sample receiving staff directly by the
Competent Person after each completed borehole. Line of custody procedures
were in place and have been applied.
Audits or Reviews
The exploration process was reviewed by Dr. Andrew Tunks a Member of the
Australian Institute for Geoscientists.
- 11 -
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section)
Criteria
Number 11 Shaft Drilling
Tenure is held via a Prospecting Right GP 30/5/1/1/2/183 (10035) (“PR”) issued
pursuant to the Mineral and Petroleum Resources Development Act 28 of 2002 of
the Republic of South Africa (“MPRDA”). The PR has been granted in respect of the
farms Roodepoort 237 IQ, Roodepoort 236 IQ, Doornkop 239 IQ, Vogelstruisfontein
231 IQ, Vogelstruisfontein 233 IQ, Witpoortjie 245 IQ and Vlakfontein 238 IQ in the
Magisterial District of Roodepoort, South Africa. The PR is held by Mintails SA
Soweto Cluster (Pty) Ltd (“MSSC”) and is in the process of being transferred to West
Wits MLI (Pty) Ltd (“WWM”) under Section 11 of the MPRDA which requires the
submission of an application to the Minister of Mineral Resources. The application
has been prepared and is expected to be submitted in the near future. MSSC has
Mineral tenement
agreed to effect the transfer of the PR and WWM has discharged its obligations
and land tenure
under those arrangements. WWM’s share capital is held to 26% by a Black
status
Economic Empowered (“BEE”) partner, Dikgosi Gold (Pty) Ltd which is a
requirement for transfer of the PR with the remaining 74% held by a wholly owned
subsidiary of West Wits Mining Limited. The PR covers prospecting activities for
gold, silver and uranium. The PR does not include tailings dumps material in the
area prospective for gold and uranium which dumps are retained by the MSSC
and/or its associated entities. On 10 April 2015 the Department of Mineral
Resources for South Africa (“DMR”) upheld an appeal against an earlier decision
not to extend the PR and the PR was thereby extended for a further period of 3
years from that date. The conduct of prospecting activities on the PR is to be
undertaken in accordance with a prospecting works programme and an
environmental management plan lodged with the DMR in August 2015.
Exploration done
No other parties have performed exploration in the No 11 Shaft area since 2008.
If Mineral Resource estimation is to be performed over this area, an appraisal of
by other parties
the previous exploration activities will have to be conducted.
The No 11 Shaft Project forms part of the Central Rand Goldfield hosted by the
Witwatersrand Supergroup sediments. The Central Rand Goldfield is situated
immediately to the south of Johannesburg and has been host to one of the most
extensive gold reserves in the world. The reefs have been mined continuously on
Geology
strike for approximately 46km in an east/west direction, bounded by the former
DRD mine (now West Wits MLI PR) in the west to East Rand Proprietary Mine in
the east. Reefs were mined down-dip, to the south, for about 6km from its outcrop
position, to depths of approximately 3km. Between 1897 and 1984, approximately
9 000 tons of gold were extracted from the Central Rand Goldfield. The reef
- 12 horizons are channelised conglomerates. The major orebodies mined in the
Central Rand Goldfield are the Main Reef, Main Reef Leader, South Reef, Bird reefs
and Kimberley reefs. The White Reef is the lowermost, gold bearing reef of the
predominantly uranium bearing Bird reefs.
All Boreholes drilled at -60° perpendicular with the strike of the known Bird Reef
outcrop. The holes were drilled by the contracted drilling company Professional
Drill hole
Drilling Services (PDS). PDS utilised a XY44 spindle drive rig, with a wire line core
Information
recovery system. The holes were drilled NQ size, which resulted in 75.6 mm
diameter holes from which 47.6 mm diameter core was obtained
Weighting was conducted against relative sample lengths due to similar waste and
ore bulk densities. Minimum grades were dependent on laboratory detection limits
(0.001 ppm gold and 2ppm U3O8). No cutting of low and high grade samples was
performed.
Data aggregation
methods
No allowance was made to differentiate between short lengths of high grade results
and longer lengths of low grade results. However, minimum sample lengths were
not less than 10cm.
Relationship
Metal equivalent values were not applicable.
All down hole lengths were converted to true widths by correcting for the dip of the
between
strata.
mineralisation
widths and
intercept lengths
Diagrams
See Report - Figures 1 through 7.
Balanced reporting
Exploration Results for all boreholes were reported.
Geology of reef intercepts were noted in detail on standardised logging sheets.
Geophysical and geochemical survey results were not conducted. .
Bulk samples were not conducted.
Bulk density was measured for each sample utilising the Archimedes principles.
Groundwater intersections were not encountered.
Geotechnical and rock characteristics were noted during logging.
Deleterious or contaminating substances such as methane were not encountered.
Re-run of Resource Estimation for No 11 Shaft Target.
Establishment of regional and local sedimentological models.
Other substantive
exploration data
Further work
Share your feedback
Discover